What you get in Dantimax kits The kits come with all the parts and plans neatly packaged in a bag. You get also assembly instructions in english only. The parts carry 1 year warranty. If you hate to solder we have a solution - just order soldered kit. It cost a bit more, but you can be sure it will work.
Remote controlled "passive preamp" kit with 5 inputs This kit is a remote controlled "passive preamp", which is just a fancy name for an input selector and volume control. This one has five line inputs and one tape input with tape monitor function. There is also a mute function and outputs for two extra relays - one power relay (perhaps for swicthing the poweramp on/off), and a spare relay output with no fixed function. All features (except the spare relay) can be controlled from both the front panel and the remote control. The kit does not include the motorized pot - the board is designed for Alps RK27 pots. You will also need a power supply for the preamp (6-12V AC or 7.5-15V DC 500mA).
Remote control receiver kit This kit is a small, simple board meant for use in DIY projects, or for upgrading equipment. It can control a motorized volume pot and two relays - one for mute and the other for power. The mute relay output can also be used for B+ delay in tube amps. The board needs an AC or DC supply in the 6-12 or 7.5-15V range, and it can run both with or without a standby supply. If you need a power supply, or a suitable remote, you can find both on the "Accessories" pages.
Remote controlled pre amp kit This kit is a remote controlled line-level preamp. It has three inputs and a mute function. The gain stage uses high quality op. amps. The default type is the Burr Brown OPA604 (others on request). The gain is set by two resistors (per channel), and the default gain is 10dB. The preamp board is made for installation in a small aluminium box as shown, but it can also be used for other purposes if you connect controls or phono sockets using wires. The preamp runs on 12V DC (+/-10%). An unregulated 9V supply works fine. The kit does not include a motorized pot. The board can be used with both Alps RK18 and RK27 pots.